 |
H-1A/3A H-604
H-504
DCM-US2
UDK-100
UHV34
USH-224
USH-214
|
|
|
| 2- and 4-Port Bus-Powered USB Hubs
Suitable for Notebook and Mobile Professional Users |
 |
2- or 4-port bus-powered USB hub |
 |
Compact design, easy to carry |
 |
Suitable for notebook and mobile professional
users |
 |
With overcurrent detection and protection
|
 |
No power adapter needed; power is drawn from
upstream port |
 |
Support full speed (12Mbps) and low speed (1.5Mbps)
devices |
 |
Supply total 450mA to two downstream
ports (H-1A) |
 |
Supply total 450mA to four downstream
ports (H-3A) |
| Properties: |
 |
Complies with USB revision 1.1 |
 |
Upstream port (A type): one |
 |
Downstream port (A type): 2/4 |
 |
Cable length: 0.25m |
 |
Dimensions (L x W x H): |
| |
H-1A: 50 x 22 x 22mm |
| |
H-3A: 55 x 45 x 26mm |
| |
 |
 |
|
|
|
| Crystal Mini HUB 4-ports w/o Adaptor |
 |
You can take full control over multiple computers
and duplicate,amplify video signals for transmission to multiple monitors. |
 |
Complies with the Universal Serial Bus specification
Rev. 1.1 |
 |
Over-current protection. |
 |
Automatic USB protocol handing |
 |
A real plug and play & hot plugged device |
 |
Good for mobile professional |
 |
Upstream port/Downstream port: 1/4 |
 |
With 1 LED signal & Bus powered |
| |
 |
 |
|
|
|
| 4-Port Mini HUB w/o Adaptor |
 |
You can take full control over multiple computers
and duplicate, amplify video signals for transmission to multiple monitors. |
 |
Complies with the Universal Serial Bus specification
Rev. 1.1 |
 |
Over-current protection. |
 |
Automatic USB protocol handing |
 |
A real plug and play & hot plugged device. |
 |
Good for mobile professional |
 |
Upstream port/Downstream port: 1/4 |
 |
With 1 LED signal & Bus powered |
 |
Bus power only |
| |
 |
 |
|
|
|
| 2-Port Bus-Powered USB Dock with
High Performance |
 |
Bus-powered mini USB hub |
 |
The DCM-US2 is a multiple devices having a printer
port, a RS232C connector and USB ports for notebook and mobile professional
users |
 |
The connector uses PC99 specification for easy
understanding |
 |
Bus-powered: no power adapter needed; power is
drawn for upstream port |
 |
The printer port complies with IEEE 1284 specifications
|
 |
Compact, lightweight and easy-to-carry
USB peripheral (can be used up to two devices) |
 |
Power consumption of downstream port is less
than 100mA, the self-powered devices provided with bigger power consumption
may not be used |
 |
LED light indicates power, USB port
status of the network |
 |
Plug-and-play |
 |
Supports Windows 98/98SE,ME, Windows 2000, and
Windows XP |
| Properties: |
 |
Complies USB revision 1.1 |
 |
Supports data transfer speeds up to 12Mbps |
 |
Upstream port (type B): single port |
 |
Downstream port (type A): 2-port |
 |
RS232C port (D-sub 9-pin): single port |
 |
Printer port (D-sub 25-pin): single port |
 |
Dimensions (L x W x H): 70 x 60 x 18mm |
 |
Cable: USB cable x 1 included |
| |
 |
 |
| |
|
|
| Plug-and-Play USB 1.1 Dock with
One Serial Port, One Printer Port, Four USB Ports |
 |
Full compliance with USB specification v1.1 |
 |
Data transfer rate: 1.1/12Mbps |
 |
Parallel port (DB 25 female): support IEEE-1284
compliant parallel printers |
 |
Serial ports (DB9 male): support up to 115Kbps
serial devices |
 |
Plug-and-play device |
 |
USB to two PS/2 ports |
 |
Support Windows 98/98SE/ME/2000/XP |
 |
Add one high-speed serial port, one
printer port, and four downstream USB ports to your PC or notebook in
second |
 |
PS/2 for connecting mouse and keyboard |
 |
USB port for connecting digital camera, CD-ROM,
PC camera, USB drive, and more |
 |
Enable two notebook PCs sharing the device |
| |
 |
 |
| |
|
|
| USB 2.0/1.1/1.0 Upstream Switching
Hub with Overcurrent Protection |
 |
USB upstream switching hub |
 |
Built-in upstream gate design |
 |
Shares four USB ports between two users |
 |
Fully compatible with USB 2.0/1.1/1.0 specification
(UHK34 for USB 2.0) |
 |
Clear LED indicates in-use status |
 |
Huge saving on working time and equipment
investment |
 |
With overcurrent protection |
| |
 |
 |
| |
|
|
| Self-Powered USB 2.0 Four-Port
Hub, Plug-and-Play Installation |
 |
Complies with standard USB 1.1 and USB 2.0 specifications
|
 |
Support high-speed 480Mbps, full-speed 12Mbps
and low-speed 1.5Mbps data transfer rates |
 |
Supports plug-and-play installation |
 |
Supports hot plug |
 |
With overcurrent protection on each port |
 |
Auto detect speed and connection of
device |
 |
Tiered star topology supporting up to five tiers
and 127 devices |
 |
Self-powered mode |
 |
Four USB external ports up to 500mA |
 |
Per port status LED indicators |
| |
 |
 |
| |
|
|
| Self-Powered USB 1.1 and 2.0 Four-Port
Hubs, Plug-and-Play Installation |
 |
Complies with standard USB 1.1 and USB 2.0 specifications
|
 |
Supports high-speed (480Mbps), full-speed (12Mbps)
and low-speed (1.5Mbps) data transfer rates |
 |
Plug-and-play and hot pluggable supported |
 |
With overcurrent protection on each port |
 |
Auto speed detection and connection of device |
 |
Tiered star topology supporting up
to five tiers and 127 devices |
 |
Self-powered mode |
 |
Four USB external ports up to 500mA
|
 |
Per port status LED indicators |
| |
 |
 |
|
|